Seating factory in Lecong, Foshan

Cutting, welding, powder coating and upholstery run in one building, with the cartons packed on the floor below the powder line.

Foshan, Guangdong: Own factory and showroom in one building, Lecong district.
Cut, weld, coat, upholster: Four processes in-house, one of them the powder line.
Custom and batch: To drawing, to sample, or from the range on file.
Video, inspection, visit: Three ways to verify before the first container.

Workshop floor stacked with timber panels and part-built frames, with workers at benches either side of the centre aisle — Workshop floor, Lecong — stock staged either side of the centre aisle

01What runs in this building

Tube is cut and bent here, frames are welded here, and the powder line is here — four-stage pre-treatment, then coat, then cure — with the upholstery cut and sewn on the floor above.

Table tops are cut and edged here, and the underside is sealed before assembly. Panels and crates are made to the length of the run rather than to a standard box, because a 3,600 mm booth crated to a 2,400 mm standard is a crease waiting to happen in the first container.

02Nothing is bought in and resold

Six processes sit under this roof, and that is the whole supply chain. Replacement pads and spare frames come off the same line as the first order, not from a second factory.

Trading offices can quote a chair they have never seen. The quote here comes from the people who cut the tube, and the person answering a question about a weld is the person who welds it.

03The work we turn down

We build seating and tables. We do not build fixed joinery, wall panelling, counters, lighting or flooring, and we do not install.

What we will do is read the plan and say which line fits where, with a seat count and a table mix. If a booth run should be a bench row instead, that is the answer you get.

04Three ways to check

Live video walk-through at a time you pick, third-party inspection at any stage, or a visit. Lecong is twenty minutes from the factory gate and the showroom is in the same building.

Ask for the batch record from the last container that shipped.

+Inside the workshop

Operator feeding boards through a planer, shavings banked up beside the machine — **Timber planed**Boards are planed to section before the saw, so a leg blank starts square.

Welder joining a chair frame at a steel workbench — **Welding**Frames are jigged and welded beside the saw that cuts the tube.

White coated chair frames hanging on the powder line — **Powder coating**Treated, coated and cured on the line, then checked before crating.

Machinist sewing a seat cover at an industrial sewing machine — **Upholstery**Covers are cut and sewn on the floor above the powder line.

Cushion pads being fitted to chair frames on a workbench — **Assembly**Pads are fitted, squared and checked against the signed sample.

Chairs stacked in rows along the bay wall, counted before packing — **Stacked by order**Finished chairs are stacked and counted per order before they go to packing.

Foshan, Guangdong

Own factory and showroom in one building, Lecong district.

Cut, weld, coat, upholster

Four processes in-house, one of them the powder line.

Custom and batch

To drawing, to sample, or from the range on file.

Video, inspection, visit

Three ways to verify before the first container.

?Questions

How big is the workshop?

Six processes and a packing floor under one roof. Headcount and floor area are answered on the video call, where the camera shows the floor rather than a figure.

Do you work with chains outside Asia?

Yes. Most of the range ships to Europe, the Gulf and Australia, in containers planned per store.

Can we visit before placing an order?

Yes, and it is the fastest way to see whether the powder line does what this page says it does.

Next step

Come and see the line

Video walk-through at a time you pick, or a visit to the workshop in Lecong. Ask for the batch record from the last wave that shipped.

Send it on WhatsApp What to include Own factory · EXW Foshan or DDP